Blog FacebookTwitterBlog Blog 

24x7 Customer Support : 9555-077-077

Home | Careers | Enquiry | Contact Us | Site Map

Honeycomb Panels

Stone Honeycomb Panels

 

HONYLITE™ Stone Honeycomb Panels are composite wall panels made up of a thin natural stone veneer reinforced with an aluminum honeycomb backing. The stone veneer can be almost any stone including granite, marble, limestone, travertine and onyx.

Stone Honeycomb Panel

Combining the aerospace technology of aluminum honeycomb with the timeless beauty of natural granite, marble and limestone, it can be used for a wide variety of applications including those typically considered weight or cost-prohibitive. They have been used extensively in exterior, interior, renovation, elevator, and specialty applications.

HONYLITE™ Stone Honeycomb Panel average weight is 16 kg/sq. m, which is approximately 80% less weight than solid stone. This weight savings alone provides huge savings in installation labor, structural requirements, and installing time.

Stone Honeycomb Panel

Tough, durable Stone Honeycomb Panels offer fantastic impact resistance and flexural strength. They can resist up to 60 times more impact than solid 3 cm thick granite.

HONYLITE™ Stone Honeycomb Panel withstands hurricane force winds and large missile impacts. It has excellent performance in bond strength and flexural capacity following 4 pH acid rain and UV radiation exposure.

HONYLITE™ Stone Honeycomb Panel is impervious to water penetration, even with open structured stones such as Travertine, Indiana limestone and French limestone. The fiber-reinforced epoxy skin directly behind the stone provides a waterproof barrier.

Benefits:

  • The beauty of natural stone - Granite, marble, limestone, travertine, onyx
  • HONYLITE™ Stone Honeycomb Panels weigh 80 percent less than solid stone
  • Impact strength more than 60 times greater than 3 cm granite
  • Nearly unlimited choice of marble, granite and limestone
  • Polished, honed, flamed, bush-hammered, or sandblasted finishes available
  • Bond has been tested at a wind load capacity of over 400 psf.
  • Holds up to acid freeze-thaw and seismic racking
  • Resists large missile impact and dynamic hurricane loading
  • Easier color blending and matching
  • Will not warp like many 3cm stones.
  • Reduced installation time and cost.
  • Reduced installed cost
  • Can be made into prefabricated wall panels or quickly and easily field installed.
  • High flexural strength allows larger size panels and high wind load capacities
  • Impervious to water penetration
  • The flexibility of the panel makes it the number one choice for seismic conditions
  • Stone is permanently bonded over every centimeter with aviation quality epoxy

Applications :



Wide range of applications wherever extreme lightweight is required such as



  • Exterior as well as interior walls of airports and railway stations for better acoustical and heat insulation, good impact resistance and radiation proof.
  • Exterior walls of factories for better safety and flexibility exterior applications.
  • Large module walls and floors requiring high technical performance.
  • Temporary interiors such as exhibitions and showrooms.
  • Walls & Floors in elevators.
  • Board and yacht interiors.
  • Furnishing (counter-tops, panels etc) sliding walks, ceilings.
  • Large size panels easily installed without adhesive.
  • Prefabricated bathroom cabins for hotels, cruise luxury bath and yachts.

Product Data

Average Weight: 16 kg/sq. M
Standard panel dimensions: 4’ x 8’ (1220 x 2440)mm
Maximum panel dimensions: 5’ x 10’ (1525 x 3050)mm
Overall panel thickness: (25mm ± 1.5mm) or (20mm ± 1.5mm) or (15mm ±1.5mm)
Tolerances (length, width & squareness): ( ±1.5 mm)
Aluminum honeycomb thickness: 20mm or 15mm or 10mm
 
 
Aramid Fibre Honeycomb Core (PN

HPL – ALU Honeycomb Panel:

HONYLITE™ HPL – ALU Honeycomb Panel ​is a sandwich panel bonded with high pressure laminate face material and with a core in aluminum honeycomb. It offers high mechanical properties and good fire performances. In particular, HPL-ALU Honeycomb Panel is widely applied in shipbuilding and railway sector. The face material can be painted in different RAL colors. The HPL faces (skins) are available in different thicknesses and coatings.

Our panels are produced according to the needs of our clients, therefore dimensions and specifications are determined by our customers. Lightweight panel HPL-ALU can be applied in different sectors and for following applications: partitions, interiors, furniture, ceilings and floors.

Top
 
Aramid Fibre Honeycomb Core (PN

SS-ALU Honeycomb Panel:

HONYLITE™ SS-ALU Honeycomb Panel is a lightweight sandwich panel with a core in aluminum honeycomb and skins of stainless steel satin finish on both the sides. This panel is normally used as decorative part for interiors. Moreover, it is also used in architecture and design since it combines decorative and mechanical properties. 

These panels can be used either for floors, ramps, lifts, engine and technical rooms and in general where anti-slippery properties are required.

Top
 

GI-ALU Honeycomb Panel

GI-ALU Honeycomb Panel

HONYLITE GI-ALU Honeycomb Panel or Galvanized Iron Honeycomb Panel is a lightweight sandwich panel with a core in aluminum honeycomb and skins of galvanized iron on both the sides. It offers high mechanical properties and good fire performances. The face material can be painted in different RAL colors. The face skins are available in different thicknesses and coatings.

Our panels are produced according to the needs of our clients, therefore dimensions and specifications are determined by our customers. Lightweight panel GI-ALU can be applied in different sectors and for following applications: partitions, interiors, ceilings and floorings.

These Honeycomb Panels are A2 fire rated in accordance with EN 13501-1:2007 A2-s1,d0


Aramid Fibre Honeycomb Core (PN

FRP-ALU Honeycomb Panel:

HONYLITE™ FRP-ALU Honeycomb Panel is a lightweight composite panel with an aluminium honeycomb core faced with fibre glass impregnated with epoxy resin.

This panel offers unique characteristics since it combines lightweight with high mechanical properties. The application of this panel for example permits huge savings as far as weight and thickness of natural stones slabs, such as marbles and granite and mosaics are concerned. In this way, also the costs of these materials can be reduced.

Top
 
Aramid Fibre Honeycomb Core (PN

PLY-ALU Honeycomb Panel:

HONYLITE™ PLY-ALU Honeycomb Panel is a sandwich panel with an aluminium honeycomb core and skins in plywood.

All our products are produced according to the needs of our customers, so it's the clients who choose the mechanical properties of the sandwich panel like the type of the wood, skin - thickness, panel - thickness, dimension, etc.

In shipbuilding sandwich panels PLY-ALU can be used for the interior design and furniture.

Top
Copyright © 2017 Universal Metaltek, All rights Reserved.